6
Assembly
6.1
Safety information
›
$VVHPEO\PD\RQO\EHFDUULHGRXWE\WUDLQHGTXDOLʾHGSHUVRQQHO
›
Abide by the system-related conditions and requirements of the system manufacturer or plant constructor.
›
Safety elements, e.g. protective grids, may not be dismantled, circumvented or put out of function.
6.2
Preconditions for assembly
•
3ODFHRILQVWDOODWLRQSURWHFWHGDJDLQVWGXVWPRLVWXUHDQGLQʿXHQFHVRIWKHZHDWKHU
•
The installation position is unimportant, the Multibox can be installed both horizontally and also vertically, likewise the blow-out
direction can be changed on site.
•
Only to be positioned outside with a weather-protection roof (accessory).
•
When assembling the MUB/T, please make sure that the there is enough space for the installation of the unit
(important at motor side, in case a motor or impeller requires replacement, see Fig. 10).
Fig. 10: MUB/T Preconditions for assembly (motor side)
6.3
Assembly
NOTE
The fan may only be lifted by the base frame when unpacking it.
"
Do not distort the housing of the Multibox in installation.
"
3D\DWWHQWLRQWRWKHWKURXJKʿRZGLUHFWLRQDUURZV
"
Ensure secure access to the Multibox for maintenance and repairs.
"
Provide for contact and suction protection and safety distances pursuant to DIN EN 294 and DIN 24167-1.
"
*XDUDQWHHXQLQKLELWHGDQGHYHQʿRZLQJLQWRWKHGHYLFHDQGIUHHEORZLQJRXW
6.3.1
Floor assembly
"
)LWWKHEDVHIUDPHRQDOHYHOʿDWVXUIDFH
"
&ORVHWKHFRQWDFWVXUIDFHEHWZHHQWKHEDVHIUDPHDQGSOLQWKRUʿRRUZLWKFHOOXODUUXEEHURUZLWKDFHOOXODUPDWHULDOWDSH
"
Fit the air connection lines and the accessories.
6.3.2
Wall and ceiling assembly
WARNING
Hazard from falling parts
›
Check the base (wall/ceiling) for strength before assembly.
›
:KHQVHOHFWLQJWKHʾWWLQJPDWHULDOSD\DWWHQWLRQWRZHLJKWWHQGHQF\WRYLEUDWHDQGWHQVLOHIRUFHVZHLJKWLQIRUPD
-
tion on the name plate).
"
)LWWKH0XOWLER[RQDʾUPEDVHZLWKVXLWDEOHʾWWLQJPDWHULDO
"
Fit the air connection lines and the accessories.
41
