Clean the damper blades with a cloth. If they are severely fouled, an environmentally friendly
degreasing agent can be used.
7.4 Additional maintenance
Living HP does not require any maintenance other than the annual service. However things to be checked
in addition could include:
• Tightening of clamps in the cabinet.
• Measuring power consumption.
• Reviewing settings and set points.
Warning
• Frequency converters must not be touched normally. The settings are made at the factory, and it is
important that the parameters are not changed without consultation with Systemair. This could have
critical consequences for compressors and the warranty may be invalidated.
All technical data for Living HP is supplied and is stuck to the inside of the control panel cabinet. The test
diagram from the factory, instructions for installation, maintenance and operation, connection diagram and
other documents are also supplied with the unit.
Operation and Maintenance Instructions
209531
30
Systemair AB
