SystemAir HAN 13, Руководство по установке и обслуживанию

Страница: 17 / 40

English
RS485
GND
12v
12V
GND
1
2
RT
GND
15 HAN
Use a pozidrive M3.5 screwdriver, Form Z, to make the connections.
These units are equipped with a local switch used as general terminal board.
The proximity switch can be mounted at two different locations:
The switch can be padlocked.
A circuit breaker or fuse holder ( not supplied ) must be installed on the main
power supply of the unit in accordance with the circuit diagram; for the raitings,
refer to the electrical specifications.
3N~400V
12.1. CONNECTION OF RCW2 AND REMOTE ROOM TEMPERATURE
100 m MAXI
1 mm² MAXI
Shielded cable
IF the RT sensor is not used, the RCW2 must be configured in Zone 1 with the local temperature function
activated.
Remote room
temperature sensor
delivred with the
machine (optional
installation)
1000 m MAXI
Shielded 2 twisted pairs cable
with setting with terminal GND.
0,12 à 0,3 mm²