SystemAir HAN 13 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 40

SystemAir HAN 13 Скачать руководство пользователя страница 11

English

9

HAN

The unit is not designed to withstand weights or stresses from adjacent equipment, pipe work

or constructions. Any foreign weight or stress on the unit structure could lead to a malfunction

or a collapse with dangerous consequences for personnel and property. In such an event, the

warranty shall be null and avoid.

9. INSTALLATION

²

The building structure must be capable to carrying the weight of the unit during operation.

²

The place of installation must not be subject to flooding.

²

The

HAN

should be installed on a flat, clean surface without any obstacles. The surface area must be

sufficient to spread the weight of the unit over the building structure.

²

Ensure that the recommended free clearances around the unit are maintained to avoid any risk of

malfunctions.

²

Ensure that there are no obstructions around the condenser or the air outlet to avoid any risk of

recycling old air.

²

In addition to the service clearances stated on the dimensions sheet, it is imperative to provide a

safe and appropriate access to the unit for repairs and servicing.

²

The installer is responsible for providing the weaterproof seal between the building and the

HAN

. The

installer must be fully versed in the practice of roof mounted equipments and must comply with the

recommendations and rules detailed in the Technical Directives.

²

In order to avoid risk of condensation and energy losses, all outdoor ducting and piping must be

insulated.

9.1. PLACE OF INSTALLATION AND REQUIREMENTS

SEE APPENDIX

13-15-17-19 25-31

A

mm

800

800

B

mm

800

800

C

mm

800

800

D

mm

850

1000

E

mm

3000

3000

9.2. CLEARANCE

9.3. ATTACHMENT TO THE GROUND

«
...
9
10
11
12
13
...
»

Содержание HAN 13









































Отзывы:

Нет отзывов