SystemAir DVV-Ex 1000-XL, Инструкция по установке и эксплуатации

Страница: 29 / 33

Uninstalling/dismounting
DVV-Ex XS-XL 23.02.2015 29
10.4 Spare parts
In case of order of spare parts please specify the serial number of the fan. You can find it on the name plate or in the
test protocol.
Spare parts: electric motor (at DVV-Ex there is a restriction to use only from the test lab allowed motors), impeller,
service switch, casing.
11. Uninstalling/dismounting
WARNING
Hazard from electrical voltage!
•
Switching off and uninstalling only by a trained electrician or trained and instructed qualified person-
nel!
•
Observe 5 safety rules for the electrical expert!
-
disconnect from the power supply (all-pole),
-
prevent switching on again,
-
test absence of voltage,
-
earthing and short-circuiting,
-
protect adjacent live parts by covers and barriers and fit a suitable warning notice.
DANGER
Explosion protection!
Intervention in the fan or in a connected system is allowed only if no pottentially explosive atmosphere
present and if there is no danger to appear it!
CAUTION
Danger from cutting edges and impact!
•
Wear protective gloves when dismounting!
•
Dismount carefully.
WARNING
Hazard from falling parts!
•
When selecting the hoisting device observe the weight (weight information on the name plate).
Carefully disconnect all wires.
Remove the fan from duct and roof base. Carefully remove the fastening material.
Lift the fan with an appropriate hoisting device on the provided lifting eyes. Place the fan on appropriate pallet.
12. Disposal
12.1 Disposal of the fan
Should the fan be disposed, proceed as follows:
Disassemble the fan into its components.
Separate the parts according to
-
reusable material;
-
material groups to be disposed (metal, plastics, electrical parts, etc.).