3
Position the sections directly in front of each other.
Level the unit with help of the enclosed mounting
feet to get the sections parallel and at the same
height.
Important
Make sure not to pinch loose cables.
figure
4
Lock the sections together with the Disc-lock
system. One Disc-lock in every vertical part of the
section corner is required. Place all 4 Disc-locks
loosely over the 2 factory mounted pins before
fitting them properly. Lock the sections tightly
together with the help of the enclosed tool
Important
The disc-lock system must not be used to pull
the sections together.
Note:
DVCompact DXR units starting from size 50 don’t
have the disc lock system. Their sections are fitted
together by the use of internal triangular brackets
that are fitted from factory.
figure
figure
5
Danger
• Make sure that the Mains supply to the unit is disconnected before performing any maintenance or
electrical work!
• All electrical connections must be carried out by an authorized installer and in accordance with
local rules and regulations.
Connect cables from the Reversible section to corresponding connectors from the air handling sections.
Connectors are different and cannot be mixed.
6
Install and connect all external components to the unit, such as: supply air sensor, pressure transmitters,
control panel, etc. For more information see: 7.4
Installation of included components
DVCompact
Installation and Service
211117
10
Systemair Sverige AB
