1
Introduction
1.1
Product description
Included in the kit are two settable differential pressure trans-
mitters, two measuring taps, one red and one blue tube (2 m),
one two-wire cable (4 m) and one installation instruction.
1.2
Intended use
The VAV duct pressure control kit is used for VAV control of
air handling units.
1.3
Document description
This document contains instructions for installation and con-
figuration of the product. The procedures must be done by
approved personnel only.
1.4
Product overview
1
3
2
4
1.
Differential pressure transmitter
2.
Electrical cable
3.
Tubes
4.
Pressure measuring taps
2
Product liability
Systemair is not liable for damages that the product causes
in these conditions:
• The product is incorrectly installed, operated or
maintained.
• The product is repaired with parts that are not original
spare parts from Systemair.
• The product is used together with accessories that are not
original accessories from Systemair.
3
Safety
3.1
Safety definitions
Warnings, cautions and notes are used to point out specially
important parts of the manual.
Warning
If you do not obey these instructions,
there is a risk of death or injury.
Caution
If you do not obey these instructions,
there is a risk of damage to the product,
other materials or the adjacent area.
Note:
Information that is necessary in a given situation.
1
