Model DSD32R
58
12. If all Channels have the same alarm recording parameters, after setup of one channel
press “
ALL
” below the menu and system will pop up “
All setting is applied to all
Channel
”, press “
Enter
” for all Channels to set these parameters automatically.
13. When user selects ‘
Enter
’, the current parameter setup will come into force. If user
selects ‘
Cancel
’, the current change will be lost.
Note
If the P/T/Z output is set at 0, it means that P/T/Z will not follow up the
preset
MOTION-REC (Motion detection record)
By detecting the motion in the video, recorder can start motion detection recording.
Parameters like sensitivity of motion detection, motion detection zone, P/T/Z movement,
alarm recording duration, record quality, alarm output port, alarm output duration can be
configured individually.
Operational Steps:
1. Select
Motion REC.
2. Press
“
OK
” to popup a dialogue box for parameter setting. Press “
Up
” or “
Down
”
to move the cursor for setting, press “
Left
” or “
Right
” to select terms and input
parameters.
Sensitivity adjustment and motion detection zone setup are described below in detail:
3.
Channel
: Channel selected for motion detection.
