35
Section 6 Manual Record
The system provides a manual override video recording function on one channel.
Manual recording will run continuously until the user stops the function.
Operational steps:
1
User presses ‘
Record ’
to enter manual record control interface.
2 User selects channel by pressing “UP” or “DOWN” button, then marking this
channel “
” or “ ” by pressing the ”LEFT” or “RIGHT” buttons. Select
“
” to start record; select “ ” to end record; user may select all channels
by select “ALL”; select “NONE” to cancel all channels.
3. The user must press “APPLY” to make the modification effective.
Selecting “BACK” deletes all modification.
Note:
Manual recording will be ineffective if the HDD is fully
occupied.
