Model DSD32R
36
Section 7 Stop Record
If the system is in automatic recording mode, the user can stop recording immediately
through this function. The modes of recording, which can be stopped, include manual,
timing, alarm and motion detect.
Operational steps:
When in manual recording mode, the user can press “stop ” for
2 seconds
continuously
to stop the channel recording. If the user presses “stop ”
continuously
for 5 seconds
all channels recording will stop.
As for timing, alarm and motion detect records when these are active ( please refer to
the sections on “Timer Recording,” “Alarm Recording” and “Motion Detect
Recording” for the specific exiting conditions ), user can press “stop ” for
2 seconds
continuously
to stop recording the current channel. As soon as record is triggered
again, the recording for this channel will be restarted. Press “stop ” for
5 seconds
continuously
to stop recording of all channels. When record of all channels is activated
again, the recording of all channels will be restarted. If the PTZ adjusts automatically
at the time of recording, the system will command the PTZ to return to the original
position automatically.
Note
If it’s under the event trigger recording, this function can only stop
recording. It will not affect alarm output. Please refer to section” Alarm
Release” for simultaneous alarm stopping
