41
Section 10 Remote Control Address Selection
This DVR can be controlled by remote control with the same effect as inputting by the
keyboard panel. The remote control can control one or more DVRs simultaneously. The DVR
identifies the object controlled by the remote control according to system identification. If the
address selected by remote control is not local, all the remote control commands will be
automatically neglected. Remote control address selection provides the function for user to
select and operate the designated DVR. When the DVR is powered, the DVR defaults to
accept remote control commands. If the address is ‘000’, it will be labeled as a broadcast
address and remote control will control all equipment.
Operation steps:
1. User presses ‘
Select
’ button on remote control.
2. All DVRs within the range controlled by the remote control will pop up an address
selection window. If one DVR within the range controlled by remote control is in
non-idle status such as menu operation or PTZ control etc., this address selection will not
be effective for this machine and it can continue to accept other remote control
commands when it is idle.
3.
User inputs the required address. If user selects ‘
Enter
’, the address selection will
become effective. Otherwise, the address modification will be of no effect.
