Sysmac CPM1A-20CAR-A, Руководство по эксплуатации

Страница: 31 / 146

17
2-1 Specifications
2-1-1 General Specifications
Item CPM1A-20CAR--A CPM1A-32CAR-A
Supply voltage AC type 100 to 240 VAC, 50/60 Hz Supply voltage
DC type NA
Operating voltage range AC type 85 to 264 VAC Operating voltage range
DC type NA
Power consumption AC type 30 VA max. 60 VA max. Power consumption
DC type NA NA
Inrush current 30 A max. 60 A max.
External power supply
(AC type only)
Supply voltage 24 VDC External power supply
(AC type only)
Output capacity 300 mA (see note)
Insulation resistance 20 M
W
min. (at 500 VDC) between the external AC terminals and
protective earth terminals
Dielectric strength 2,300 VAC 50/60 Hz for 1 min between the external AC and protective
earth terminals, leakage current: 10 mA max.
Noise immunity 1,500 Vp-p, pulse width: 0.1 to 1
m
s, rise time: 1 ns (via noise simulation)
Vibration resistance 10 to 61.2 Hz, 0.075-mm amplitude, 61.2 to 150 Hz;
Acceleration: 1.5 G in X, Y, and Z directions, 10 sweeps, 8 minutes each
Shock resistance 20 G three times each in X, Y, and Z directions
Ambient temperature Operating: 0
°
to 55
°
C
Storage: -- 20
°
to 75
°
C
Humidity 10% to 90% (with no condensation)
Atmosphere Must be free from corrosive gas
Terminal screw size M3
Grounding Less than 100
Power interrupt time AC type: 10 ms min.
DC type: NA
(A power interruption occurs if power falls below 85% of the rated voltage
for longer than the power interrupt time.)
CPU Unit weight AC type 500 g max. 575 g max. CPU Unit weight
DC type NA NA
Expansion I/O Module weight 300 g max. 300 g max.
Note
When the external power supply provides an overcurrent or is short-circuited,
the external power supply voltage will drop, and the PLC will stop operation.
Specifications
Section 2-1