Sysmac CPM1A-20CAR-A, Руководство по эксплуатации

Страница: 37 / 146

23
Transistor Output (Sink Type)
Item Specification Item
CPM1A-10CDT-D CPM1A-20CDT-D CPM1A-30CDT-D CPM1A-40CDT-D CPM1A-20EDT
Max. switching
capacity
24 VDC
+10%
/
---15%
, 0.3 A/point (see note) Max. switching
capacity
0.9 A/Unit 0.9 A/common
1.8 A/Unit
0.9 A/common
2.7 A/Unit
0.9 A/common
3.6 A/Unit
0.9 A/common
1.8 A/Unit
Leakage current 0.1 mA max.
Residual voltage 1.5 V max.
ON delay 0.1 ms max.
OFF delay OUT01000/01001: 0.2 ms max. (load current: 100 to 300 mA)
0.5 ms max. (load current: 5 to 100 mA)
Other than OUT01000/01001: 1 ms max. (load current: 5 to 300 mA)
Fuse 1.25 A/common (cannot be replaced by the user)
Circuit
configuration
OUT
OUT
COM (--)
Output LED
Internal
Circuits
24 VDC
Note
When using the OUT01000 or OUT01001 as a pulse output, connect dummy
resistors as required to set the load current to 0.1 to 0.2 A. If the load current is
below 0.1 A, the ON-to-OFF response time will become longer and high-speed
pulse will not be output. On the other hand, if the load current is above 0.2 A, the
transistor may generate heat and components may be damaged.
Transistor Output (Source Type)
Item Specification Item
CPM1A-
10CDT1-D
CPM1A-
20CDT1-D
CPM1A-
30CDT1-D
CPM1A-
40CDT1-D
CPM1A-
20EDT1
Max. switching
capacity
24 VDC
+10%
/
---15%
, 0.3 A/point (see note) Max. switching
capacity
0.9 A/Unit 0.9 A/common
1.8 A/Unit
0.9 A/common
2.7 A/Unit
0.9 A/common
3.6 A/Unit
0.9 A/common
1.8 A/Unit
Leakage current 0.1 mA max.
Residual voltage 1.5 V max.
ON delay 0.1 ms max.
OFF delay OUT01000/01001: 0.2 ms max. (load current: 100 to 300 mA)
0.5 ms max. (load current: 5 to 100 mA)
Other than OUT01000/01001: 1 ms max. (load current: 5 to 300 mA)
Fuse 1.25 A/common (cannot be replaced by the user)
Circuit
configuration
OUT
COM (+)
Output LED
Internal
Circuits
24 VDC
OUT
Specifications
Section 2-1