Page
12
of
32
5
SIM Installation and Configuration
Initial configuration is best carried out somewhere comfortable and clean with a reliable internet connection.
The following procedure will have been carried out by Syrinix if the SIM card and details were sent to us prior
to PIPEMINDER-S being delivered. Before starting you will need:
•
Small cross-head screwdriver;
•
Standard size SIM card;
•
APN, Username and Password information for SIM card;
•
Mini USB lead (supplied).
5.1
To install the SIM card:
1.
Remove the SIM cover on the rear of PIPEMINDER-S;
2.
Slide the metal cover to open the hinge-type SIM holder;
3.
Pull SIM holder upwards
4.
Insert the SIM card into the hinged part of the SIM holder following orientation shown in Figure 2;
5.
Close and lock the SIM card holder by folding down and sliding the clip back, replace SIM cover
IMPORTANT:
•
Failure to fit the SIM cover and O-Ring correctly can result in water ingress and
damage to PIPEMINDER-S;
•
The screws retaining the SIM cover are into plastic threads, do not over tighten.
Step 1
Step 2
Step 3
Step 4
Step 5
Figure 2: SIM card Installation
Содержание PIPEMINDER S
Страница 1: ......
Страница 10: ...Page 10 of 32 4 System Components...
Страница 11: ...Page 11 of 32 Figure 2 Device overview 101667...
Страница 14: ...Page 14 of 32 Figure 4 Configuration editor on RADAR...
