Figure 3-24 Modify Number Info
To delete the numbers, you should check the checkbox before the numbers in Figure 3-21 and
click the ‘
Delete
’ button.
Check All
means to select all available items in the current page;
Uncheck All
means to cancel all selections in the current page;
Inverse
means to uncheck the
selected items and check the unselected.
3.4.4 IP
Figure 3-25 IP Configuration Interface
The IP configuration interface is used to set the IP information of the recording server, to put it in
the company LAN. After modification, click
Save
to save the settings; click
Reset
to restore the
configurations. Due to the change of IP address, the current WEB connection may fail and you
should access the recording management software again through the new IP address.
Note:
The values of the IP address, Subnet Mask, Default Gateway and DNS Server shown in
Figure 3-25 are all factory default settings.
3.4.5 Debugging Log
Figure 3-26 Debugging Log Configuration Interface
The debugging log configuration interface (see Figure 3-26) is mainly used to set the log output
parameters of the recording server. The debugging logs help trace and debug the recording
management software. The table below explains the above items in Figure 3-26.
ATP2410 User Manual (Version 4.0.0.0)
Page 25
