SYNTHR SYNTHR3, Руководство пользователя

Страница: 28 / 38

Page 28
SYNTHR3 Manuel V1.01 EN
Change about ?
LOAD PATCH
↕↕/Ok Escape Change about ?
SAVE PATCH
↕↕/Ok Escape
PATCH
The SYNTHR3 is a modular synthesizer. That is to say, all the modules that make it up are independent of each other. VCO,
VCA, VCF, MIXER, etc. all these modules are governed by the 1V/octave standard
In a historical modular synthesizer, the patches are the cables that connect the modules together. For SYNTHR3, no cables,
but push buttons that connect the modules together. This makes the connections between modules more visible, more
legible. Moreover, all these push buttons are digital switches and can be stored in profiles called "Patch".

« SAVE PATCH » and « LOAD PATCH »
These functions are present on the "function bar”
From any of the main pages, press "Edit" (Button B) and turn the encoder until you see "LOAD PATCH" or "SAVE
PATCH", press OK and select the desired profile.
You can save your own sound creations. In "SAVE PATCH" turn the encoder to a free position, press OK to save. You
can recall this button configuration at any time with the "LOAD PATCH" function.
You have access to 40 possible locations in addition to the 20 presets.
Note that when the synthesizer is started, the last used configuration is reloaded.