SYNTHR SYNTHR3, Руководство пользователя

Страница: 27 / 38

Page 27
SYNTHR3 Manuel V1.01 EN
Change about ?
MIDI CHANNEL
↕↕/Ok Escape
DIAPASON A440
on/off Escape
OTHERSFUNCTIONS
MIDI CHANNEL
This function is present on the "function bar"
From any of the main pages, press "Edit" (Button B) and turn the encoder until you
encounter "MIDI CHANNEL", press OK and select the desired mode. Press OK to
change the MIDI channel. By selecting "AUTO" the MIDI controller will be on standby
until it receives initial MIDI information that will provide it with the channel to use.
On the game mode screens (MONO, DUAL, PARA, POLYchain) Button A is assigned to « MIDIRST ». This function allows you to
quickly switch to the automatic MIDI channel without going through the MIDI CHANNEL function
Note, in PolyChain mode, the MIDI channel used for communication with the following SYNTHR3 is the current channel
1.
TUNING FORK
This function is present on the "function bar"
From any of the main pages, press "Edit" (Button B) and rotate the encoder until you
encounter "USE DIAPASON", press OK. Successive presses of OK will turn the A 440Hz
on or off. A small tuning fork will be displayed.
* Reminder: open the gain of VCA1 to hear it.
Advice:
The A 440 Hz heard is sinusoidal because it is passed through a filter. Put the SYNTHR3 in monophonic mode, put on each VCO
the triangular waveform without any modulation, set to octave 0, put the VCF1 completely open (Cutoff on 10, resonance on
0) and send successively each VCO via its switch on the VCF1 and adjust the beats by ear. Thus the 3 VCOs will be adjusted.