SYNTHR SYNTHR3, Руководство пользователя

Страница: 17 / 38

Page 17
SYNTHR3 Manuel V1.01 EN
PARAPHONIC 2 MODE
This mode allows you to play up to 3 notes in the same way as the previous mode but this time each VCO is controlled by a
hidden VCA to which one of the available envelopes is assigned. VCO1 will be controlled by the modulation envelope, VCO2
by the filter envelope and VCO3 by the VCA envelope. Each envelope will receive its corresponding gate for the note that is
pressed. This is to allow for a set of untied notes. We're getting closer to a polyphonic play.
The lowest note has priority and will be played by VCO1, the second pressed note will be played by VCO2 and the third by
VCO3.
Important :
The assembly is sent to VCA1 which, by its gain setting, allows the input level to be adjusted in VCF2. The envelope
potentiometer of this VCA1 is set to 0. The VCF2 is output by the VCA2 to which you will have to give some gain in order to
hear an output. The envelope potentiometer of VCA2 is at 0.
The level of each note is controlled by the Sustain of the respective envelope.
Last refinement instead of the VCO1, it is possible to send a mix of VCO1, SUB, RM, Noise for the 1st note via the
corresponding potentiometers and buttons of the Mixer.
Finally in this mode, the VCF2 receives on its envelope input an analog OR of each of the note envelopes. The filter can
therefore react on each played note.