CIPHER 1022 User Manual
- 4 -
system number (1 digit, whether 0 or 1) will be prefixed to the
UPCE code.
2.3.7 UPCE to EAN13 Conversion
The UPCE to EAN13 conversion can be selected via
configuration. If this setting is enabled, UPCE labels will be
treated as EAN13 label.
2.3.8 ISBN Conversion
The 1022 can perform ISBN conversion if the setting is
enabled.
2.3.9 Barcode Concatenation
Several symbologies such as Code 39, Code 93 and Code
128 provide the function of concatenation which allows several
symbols to be concatenated and be treated as one single
data entry.
Once a symbol with the embedded concatenation code (a
leading space for Code 39 and Code 93, a "FNC2" character
for Code 128) was decoded, this data will be transmitted
without postfix and delimiter, and waits for another symbol to
be "concatenated". If other symbols with embedded
concatenation code were decoded again, these codes will
also be transmitted without Code ID, prefix, and delimiter.
When a valid code with no embedded concatenation code was
read the decoded data will be transmitted without Code ID and
prefix code but the postfix code and delimiter are appended.
Barcode concatenation can be enabled or disabled for Code
39 and Code 93. CIPHER 1022 will notify the user with a
shorter than normal beep of successful decoding upon this
kind of symbologies.
2.4 Data Output
This section describes the programmable features concerning
data output.
2.4.1 Code ID
A code ID is a character which is used to represent the
symbology being decoded upon successful reading. The code
ID is prefixed to the data being transmitted if the feature is
selected. There are 4 code ID sets selectable on the 1022.
The valid code ID and the symbologies they represent are
listed below.
