CIPHER 1022 User Manual
- 2 -
2. General Programmable Features
This section describes various features of CIPHER 1022 which
are user selectable and can be programmed into the reader.
These features can be modified by reading some special bar-
code cards which are accompanied with this manual. For
detail configuration procedures please refer to the section
"CONFIGURING CIPHER 1022".
2.1 Buzzer Pitch / Duration
There are 2 different pitches (HIGH / LOW) and 2 different
duration (LONG / SHORT) could be selected for CIPHER
1022. Beside these selections, the buzzer can also be
disabled. And it will beep only when 1022 is in configuration
mode. Change of these settings will alter the audio indication
of successful readings.
2.2 Inter-Character Delay
An inter-character delay ranges from 0 to 250 mili-seconds
can be selected to match various computer response time.
Unfortunately, efforts must be taken to try out the shortest
delay time that still works properly.
2.3 Symbology Setting
This section describes the programmable settings available to
the various symbologies read by CIPHER 1022.
2.3.1 Symbologies Read
Most of the commercially available bar code symbologies are
supported,
•
Code 39/Full ASCII
•
EAN8
•
Italy Pharma Code
•
EAN8 with ADDON 2
•
French Pharma Code
•
EAN8 with ADDON 5
•
Industrial 25
•
EAN13/UPCA
•
Interleave 25
•
EAN13/UPCA with ADDON 2
•
Matrix 25
•
EAN13/UPCA with ADDON 5
•
CP 25
•
UPCE
•
Codabar
•
UPCE with ADDON 2
•
Code 93
•
UPCE with ADDON 5
•
Code 128
Each symbology can be individually enabled or disabled by
programming CIPHER 1022, and CIPHER 1022 will
automatically discriminate and recognize all symbologies that
are activated.
∗
Note :
The CODE 39 FULL ASCII utilizes combinations of
the CODE 39 to implement full ASCII capabilities. To read
