Synapse DUNE 2, Руководство пользователя

Страница: 54 / 78

Low Cut
The low-cut filter in the reverb effect can be used to
remove unwanted low frequencies from the processed
signal. This is useful for sounds containing strong bass
frequencies, such as bass drums etc. Note that the dry
signal is not affected by this parameter, only the re-
verberated signal.
Color
The color parameter can be used to equalize the mid
frequencies of the reverberated signal. At center posi-
tion the reverberated signal is unaffected. Turning the
knob to the left cuts the mid frequencies, turning it to
the right boosts the mid frequencies.
Mod-Amt
All reverbs in Dune 2 employ modulation, to gener-
ate a rich timbre. The modulation amount parameter
adjusts how strong this modulation is. At low s
Dry/Wet
Blends between the dry and processed signals.
4.14.8 Compressor
The purpose of a compressor is to reduce the dynamic
range of a signal, which increases the perceived loud-
ness and can reduce clipping problems in a digital en-
vironment. A compressor performs dynamic range re-
duction by lowering the level of loud passages. What
is considered "loud" is specified by the user, in form
of a threshold level given in decibel (dB).
Type
Two compressor types are available:
•
Air is a good general-purpose compressor. This
compressor is very transparent for low compres-
sion ratios and works on a wide range of input
signals.
•
Vintage simulates a vintage analog broadband
compressor, which saturates the signal. Good
for bass sounds.
Input
Adjusts the input level. The input level affects the
amount of compression, and should be adjusted such
that the level meter peaks around 0 dB.
54 DUNE 2 User’s Manual