Synapse Antidot, Руководство пользователя

Страница: 26 / 40

LFO 1
The output of the first LFO.
LFO 1*MW
The output of the first LFO, multiplied by the modu-
lation wheel. Use this parameter to make the LFO
amount dependent on the modulation wheel, a fre-
quently used performance tool.
LFO 1*AT
The output of the first LFO, multiplied by aftertouch.
Use this parameter to make the LFO amount depen-
dent on aftertouch.
LFO 2
The output of the second LFO.
LFO 2*MW
The output of the second LFO, multiplied by the mod-
ulation wheel. Use this parameter to make the LFO
amount dependent on the modulation wheel, a fre-
quently used performance tool.
LFO 2*AT
The output of the second LFO, multiplied by after-
touch. Use this parameter to make the LFO amount
dependent on aftertouch.
MWheel
The value of the modulation wheel.
PWheel
The value of the pitch wheel. Note that this is a bipo-
lar source, which can have positive or negative values.
Also note that this source reflects the state of the pitch
wheel directly, independent on the up / down settings
on the back panel.
ATouch
The amount of aftertouch applied.
Constant
Constant means the source is a constant 100% and
does not vary. Use this to change the operation range
of sound parameters. For example, you can program a
negative filter envelope this way (choose Constant as
source, set a negative amount, then Filter Envelope as
a destination).
26 Antidote User’s Manual