background image

 
 

15 

 
WARRANTY  STATEMENT 

 

All Symtech Corporation Transmission Service products are warranted to be free from defects in 
material and workmanship under normal use and service for a period of one year after the sale of 
product to service facility.  Items including filters, service hoses, adapters and fittings are warranted 
for a period of ninety (90) days.   Exception to this policy will be individually evaluated and must 
be approved by Symtech Corporate.  The sole obligation under this warranty shall be to repair, or 
replace any defective product, or component thereof which upon examination are deemed to the 
manufacturers satisfaction to be defective. 
 
Warranty shall not apply to any product which has been subject to misuse, negligence, or accident.  
Manufacturer shall not be responsible for any special of consequential damages and the warranty as 
set forth is in lieu of all other warranties, either expressed or implied.  However, the manufacturer 
makes no warranty of merchantability in respect to any products for any purpose other than that 
stated in literature and any applicable manufacturers shop or service manuals referred to therein, 
including subsequent service bulletins. 
 

Proof of purchase MUST accompany all warranty claims. 

 

 
 

SERVICE  STATEMENT / COMMITMENT 

 
Symtech Corporation prides itself on personal, in-depth, service communication, if you encounter 
difficulties in the operation, understanding of procedures or have general service questions we urge 
you to contact us at 

1-888-884-8182

 in order that we can be of be of assistance.  This is not an 

empty statement as our reputation is directly dependent upon your overall satisfaction.  
 
Symtech Corporation designs, builds and markets within North America.  It is our commitment to 
you that your satisfaction and favorable equipment experience is foremost to us, we will endeavor 
to meet the high standard that you expect and deserve. 
 
 

 
 

TECHNICAL

 

 
 
 

SUPPORT 

 

1-888-884-8182 

Central Standard Time. 

 

Safety by Design 

Содержание ATF 2D

















Отзывы: