Symmetricom GoWide 9.2, Руководство пользователя

Страница: 103 / 134

1
GoWide 9.2 G.shdsl Bridge/Router – User Manual
103
Gateway Mode Configuration
097-91023-01 Issue 1: February 2002
2
5
3
S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S
5
WAN Port Configuration using PPPoE Relay
5HIHUWR3URFHGXUH9IRULQIRUPDWLRQRQFRQILJXULQJWKH:$13RUWXVLQJ333R(
5HOD\
Procedure V
. Configuring WAN Port Using PPPoE Relay
Step Procedure
1
Select PPPoE Relay in the System Menu (Figure 67).
2
Enter the VPI value in the VPI field.
3
Enter the VCI value in the VCI field.
4
Select the Quality of Service type: UBR (default setting), CBR , or VBR . A pop-up screen appears. Enter the
appropriate information.
5
Select the Encapsulation type: LLC , VCMUX , or Learning ( Learning is the default setting).
6
Select the HDLC Header type: Enable , Disable , or Learning ( Learning is the default setting).
7
Enter the values for Local IP , Subnet Mask , and Gateway in the provided fields.
8
Select either Set as Default Route or Edit Routing Table under Routing Table ( Set as Default Route is the
default setting).
9
If NAT is desired, click the NAT box under Advanced .
10
Click the Apply button if all data is correct.
End of Procedure