TermiCom XPe
WWW.SYMCOD.COM
17
Recommendations
Ethernet:
Before proceeding with the wiring installation, please consult “Ethernet wiring and
recommendations TCPIP” (available at
www.symcod.com
)
Installation:
Do not cover while the unit is ON. The back of the TermiCom should not be placed flat
on a table while the unit is ON. Keep the surfaces of the TermiCom free of any material and respect a
minimum area of 2” between the back of TermiCom and of any surface in order to allow the dissipation of
internal heat.
TermiCom XPE maintenance
Cleaning:
Painted aluminium may react to some chemical agents, in particular with ammonia and with
products containing hydroxide or certain acids. Clean it with a soft soap to prevent the damage of the case.
Once in a while, use air blast to remove dust.
Certification
This equipment has been found compliant to class A Part 15 of FCC Rules. These limits are intended to
get a reasonable protection against dangerous interferences when the equipment is used in an industrial or
commercial environment. This equipment emits uses and can generate radiations of radio frequencies and
can cause dangerous interference for radio communications if it is not used in accordance with the
instruction manual. The use of this equipment is not planned for a residential use.
Troubleshooting
Problems
Solutions
I am unable to reach or modify
the system options
At start, the XPe TermiCom is authenticated as a user without privileges.
To authenticate you as an administrator, refer to the “ADMINISTRATO
R
authentification
” section.
I saw the LED lights but there is
no screen display
Unplug the 120V power for 10 seconds, plug the XPe. If there is no
improvement, sent a request including the serial number and the detailed
description of the problem to technical support at
.
"DLL missing", error
displayed at software or
driver installation
Extract a DLL file from another computer working with Windows 2000 or
XP. Copy this file in the repertory specified in the error message (usually
on C:\windows\system32\)
