15
Q u i c k R e f e r e n c e
The Direct Access Panel
The Direct Access Panel is located on the left side of the display
window. It allows you to control settings on a PPT 4300-S0E
terminal. Except for the Power icon, it is not active until after the
terminal has finished booting.
To select an item from the Direct Access Panel, tap a Direct Access
Panel icon gently with the pen.
Icon
What it does
If the terminal is off, press this icon to start the
terminal.
If the terminal is on, press this icon to turn the
terminal off.
Some terminals may configure the Power icon
differently. See page 6 for more information.
Displays terminal settings, such as IP Address,
Terminal Name, Date, Time and serial number.
Changes the level of brightness for the display.
The brightness cycles through three different lev-
els. You may also change the brightness by press-
ing <Fn-F11>.
Increases the display contrast. You may also in-
crease contrast by pressing <Fn-F9>. Note: If you
increase contrast too much, the screen goes dark.
Decreases the display contrast. You may also de-
crease contrast by pressing <Fn-F10>. Note: If
you decrease contrast too much, the screen goes
white.
Power
