Symbol PDT 3400 Series, Руководство по продукции

Страница: 98 / 146

8-2
PDT 3400 Product Reference Guide
Running Setup
To run Setup:
1. Boot the PDT 3400 by pressing and holding the PWR button for 12 seconds or the
value specified in Setup.
2. During the boot process, press the Scan Bar when the PDT 3400 displays the prompt:
Trig Skips Test
3. Press and hold the Scan Bar when the PDT 3400 displays the message:
Trig Runs Setup
until Setup displays the screen shown in Figure 8-1:
Figure 8-1. BIOS Setup Screen
a. To change the BIOS settings, press the Scan Bar with STANDARD highlighted
and proceed to step 4.
b. To reset the BIOS to the default settings, scroll down to DEFAULT using and
press the Scan Bar. The default settings are provided in Default Configuration
Parameters in this chapter for reference.
c. To exit the Setup screen, scroll down to EXIT using and press the Scan Bar.
4. If you selected STANDARD, the Main Menu (Figure 8-2) is displayed:
Figure 8-2. BIOS Setup Main Menu
SETUP 1.0
STANDARD
DEFAULT
EXIT
ê
ê
MAIN MENU
DATE 01/01/96
CONTRAST
3
KEYCLICK
SUSPEND
RESET
BOOT SEQ
ON
30
12
C
TIME 00 :00:00