Symbol PDT 3400 Series, Руководство по продукции

Страница: 54 / 146

5-6
PDT 3400 Product Reference Guide
PEN34T.SYS
The PDT 3400 Pen Driver provides a DOS mouse driver-compatible software interface for
reading coordinates and callback routines, and is used for running signature capture
applications on the PDT 3400.
The Pen driver maintains calibration data for the resistive screen overlay in CMOS memory.
If invalid calibration data is found in CMOS when the driver is loaded, a calibration utility
is automatically run to calibrate the screen.
Note: It is imperative that you load PEN34T.SYS before loading
IRCOMM.SYS. These two functions share a common interrupt line
(IRQ5) and require a specific loading order.
To load the driver, add the following line to CONFIG. SYS:
DEVICE = PEN34T.SYS
IRCOMM.SYS
Symbol provides an IrDA-compliant infrared software stack and an API for developing
applications that use the stack to communicate with remote IrCOMM devices.
IR COMM.SYS is required for performing cradle communications.
Note: If PEN34T.SYS is present, it is imperative that IRCOMM.SYS be
loaded AFTER PEN34T.SYS. These two functions share a common
interrupt line and require a specific loading order.
To load the IrDA driver, add the following line to CONFIG.SYS:
DEVICE=IRCOMM.SYS COM2 LPTn IRQ5 DONG3400 EJTx IRTOy
where:
COM2 routes data for COM2 to IrDA hardware.
LPTn routes data for LPT1, 2, 3, or 4 to IrDA hardware.
IRQ5 IR COM IRQ.
DONG3400 specific for the PDT 3400.