manualshive.com logo in svg

Symbol MC9000-K/S, Справочное руководство, Страница: 563 / 750

Поделиться
Скачать
Symbol MC9000-K/S Скачать руководство пользователя страница 563

Maintenance & Troubleshooting

15-11

All Communication Status LEDs 
are flashing red.

The unit could not configure 
itself, or it has lost the lease on 
its IP address.

Connect the unit to an Ethernet network with a 
correctly functioning DHCP server.

Failed automatic cradle 
configuration via local DHCP 
service. 

Connect a properly configured DHCP server or DHCP 
relay agent to the subnet, and power cycle the cradle. 
Check the DHCP server log to verify that the cradle is 
receiving a response to its DHCP request. 

The Ethernet link may be down. Ensure the ethernet cable is connected to an active 

hub.

Communication Status LED 
does not light up.

Mobile computer has been 
inserted incorrectly into the 
cradle. 

Remove, wait a minute, and then reinsert the mobile 
computer, ensuring it fits snugly onto the connector 
at the bottom of the cradle. 

Cradle is not receiving power.

Ensure the power supply is securely connected and 
receiving power.

Battery is not recharging.

Mobile computer removed from 
the cradle too soon.

Replace the mobile computer into the cradle. It can 
take up to 4 hours to recharge a completely depleted 
battery pack if mobile computer is suspended or 
longer if the mobile computer is on. Tap 

Start - 

Settings - System - Power 

to view battery status.

Battery is faulty.

Verify that other batteries charge properly. If so, 
replace the faulty battery. 

Mobile computer is not inserted 
correctly into the cradle.

Remove the mobile computer and reinsert it correctly. 
Verify charging is active. Tap 

Start - Settings - System 

- Power 

to view battery status.

Warning Message - “! Unable to 
obtain a server assigned IP 
address. Try again later or enter 
an IP address in Network 
Settings.”

This message occurs if a 
suspend/resume cycle is 
performed and the mobile 
computer radio is not 
associated (e.g. due to being out 
of range)

Tap 

OK

 to close the message. The mobile computer 

will obtain address information and communicate 
through the ethernet cradle. 

Table 15-4. Troubleshooting the Four Slot Ethernet Cradle (Continued)

Symptom

Cause

Solution

Содержание MC9000-K/S















































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов