LS 3603-I265A Special Operating Instructions
(73-13583-265)
Revision B: June 2000
5
Any other value for a host command causes an
error condition and a NAK string is transmit-
ted.
Note
: The parameter commands only affect
the RS-232 host parameters; not the wand or
Synapse host parameters.
The LS 3603 accepts multiple single and group
parameter change commands within one host
message, and up to 25 host commands within
one host message. The scanner only accepts
one of the following host commands within a
host message: reset defaults, upload all param-
eters, and software ID request. The specific
host message for the single host commands
that don’t contain variable data are as follows:
7
37h
Activate Specific
Beep Type
An ACK string is sent
to the host and the
scanner issues the
Beep Type corre-
sponding to the num-
bers Param Group
(Beep Duration),
Param ID (Beep
Tone), and Param
Value (Pause Dura-
tion) in this host
command string.
Table 1: Host Commands (Continued)
Value
Hex
Rep.
Command
Scanner
Response
