Symbol CRD 2700-4200E Скачать руководство пользователя страница 27

25

Warranty

(A) Warranty Symbol Technologies (hereafter “Seller”) hardware Products are warranted against defects in 
workmanship and materials for a period of three (3) months from the date of shipment, unless otherwise 
provided by Seller in writing, provided the Product remains unmodified and is operated under normal and 
proper conditions. Warranty provisions and durations on software, integrated installed systems, Product 
modified or designed to meet specific customer specifications (“Custom Products”), remanufactured 
products, and reconditioned or upgraded products, shall be as provided in the applicable Product 
specification in effect at the time of purchase or in the accompanying software license. 

(B) Spare Parts Spare parts (i.e. parts, components, or subassemblies sold by Seller for use in the service 
and maintenance of Products) are warranted against defects in workmanship and materials for a period of 
thirty (30) days from the date of shipment. Spare parts may be new or originate from returned units under the 
conditions set forth in subsection D below. 

(C) Repair of Symbol-branded hardware For repairs on Symbol-branded hardware Products under this 
Agreement, including repairs covered by warranty, the repair services provided are warranted against defects 
in workmanship and materials on the repaired component of the Product for a period of thirty (30) days from 
the shipment date of the repaired Product, or until the end of the original warranty period, whichever is longer. 

(D) Product Service Products may be serviced or manufactured with parts, components, or subassemblies 
that originate from returned products and that have been tested as meeting applicable specifications for 
equivalent new material and Products. The sole obligation of Seller for defective hardware Products is limited 
to repair or replacement (at Seller’s option) on a “return to service depot” basis with prior Seller authorization. 
Customer is responsible for shipment to the Seller and assumes all costs and risks associated with this 
transportation; return shipment to the Customer will be at Seller's expense. Customer shall be responsible 
for return shipment charges for product returned where Seller determines there is no defect (“No Defect 
Found”), or for product returned that Seller determines is not eligible for warranty repair. No charge will be 
made to Buyer for replacement parts for warranty repairs. Seller is not responsible for any damage to or loss 
of any software programs, data or removable data storage media, or the restoration or reinstallation of any 
software programs or data other than the software, if any, installed by Seller during manufacture of the 
Product. 

(E) Original Warranty Period Except for the warranty applying solely to the repaired component arising from 
a repair service as provided in Section C above, the aforementioned provisions do not extend the original 
warranty period of any Product that had either been repaired or replaced by Seller. 

(F) Warranty Provisions The above warranty provisions shall not apply to any Product (i) which has been 
repaired, tampered with, altered or modified, except by Seller’s authorized service personnel; (ii) in which the 
defects or damage to the Product result from normal wear and tear, misuse, negligence, improper storage, 
water or other liquids, battery leakage, use of parts or accessories not approved or supplied by Symbol, or 
failure to perform operator handling and scheduled maintenance instructions supplied by Seller; (iii) which 
has been subjected to unusual physical or electrical stress, abuse, or accident, or forces or exposure beyond 
normal use within the specified operational and environmental parameters set forth in the applicable Product 
specification; nor shall the above warranty provisions apply to any expendable or consumable items, such as 
batteries, supplied with the Product. 

EXCEPT FOR THE WARRANTY OF TITLE AND THE EXPRESS WARRANTIES STATED ABOVE, SELLER 
DISCLAIMS ALL WARRANTIES ON PRODUCTS FURNISHED HEREUNDER INCLUDING ALL IMPLIED 
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR USE. ANY IMPLIED 
WARRANTIES THAT MAY BE IMPOSED BY LAW ARE LIMITED IN DURATION TO THE LIMITED 
WARRANTY PERIOD. SOME STATES OR COUNTRIES DO NOT ALLOW A LIMITATION ON HOW LONG 
AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR 
CONSEQUENTIAL DAMAGES FOR CONSUMER PRODUCTS. IN SUCH STATES OR COUNTRIES, FOR 
SUCH PRODUCTS, SOME EXCLUSIONS OR LIMITATIONS OF THIS LIMITED WARRANTY MAY NOT 
APPLY. 

The stated express warranties are in lieu of all obligations or liabilities on the part of Seller for damages, 
including but not limited to, special, indirect or consequential damages arising out of or in connection with the 
use or performance of the Product or service. Seller’s liability for damages to Buyer or others resulting from 
the use of any Product or service furnished hereunder shall in no way exceed the purchase price of said 
Product or the fair market value of said service, except in instances of injury to persons or property.

Q

u

i

c

k

 

R

e

f

e

r

e

n

c

e

Содержание CRD 2700-4200E





























Отзывы: