12
C
R
D
2
7
0
0
-
4
2
0
0
E
3. At the Public network settings menu:
a. To set the Static Mode value:
Press 1 to set the Static Mode, the Static Mode selection
appears:
Enter 1 to enable or 0 to disable Static mode.
The Public network settings menu re-appears with the
Static Mode value changed to the new selection value.
b. To set the NAPT Mode value:
Press 2 to set the NAPT Mode, the NAPT Mode selection
appears:
Enter 1 to enable NAPT or 0 to disable NAPT mode.
The Public network settings menu re-appears with the
NAPT Mode value changed to the new selection value.
c. Set the DHCP Address Mode as follows:
For the 6 DHCP Address Mode:
Set NAPT Mode to 0 (see set NAPT Mode, page 12).
When Static Mode and NAPT Mode are both set to 0,
the cradle acquires 6 IP addresses from the DHCP
server.
Enter ‘1’ to enable Static mode
Enter ‘0’ to disable Static mode
Enter new value:
Enter ‘1’ to enable NAPT mode
Enter ‘0’ to disable NAPT mode
Enter new value:
