Symantec Veritas Cluster Server 5.0 Update 3, Руководство по установке

Страница: 68 / 176

To configure the cluster
1 Review the configuration instructions that the installer presents.
2 Enter the unique cluster name and cluster ID.
Enter the unique cluster name: [?] clus1
Enter the unique Cluster ID number between 0-65535: [b,?]
7
3
Review the NICs available on the first system as the installer discovers and
reports them.
The private heartbeats can either use NIC or aggregated interfaces. To use
aggregated interfaces for private heartbeat, enter the name of the aggregated
interface. To use a NIC for private heartbeat, enter a NIC which is not part of
an aggregated interface.
4 Enter the network interface card details for the private heartbeat links.
You can choose the network interface cards or the aggregated interfaces that
the installer discovers.
See “Starting VCS” on page 77.
You must not enter the network interface card that is used for the public
network (typically eth0.)
Enter the NIC for the first private heartbeat NIC on galaxy:
[b,?] eth1
Would you like to configure a second private heartbeat link?
[y,n,q,b,?] (y)
Enter the NIC for the second private heartbeat NIC on galaxy:
[b,?]
eth2
Would you like to configure a third private heartbeat link?
[y,n,q,b,?](n)
Do you want to configure an additional low priority heartbeat
link? [y,n,q,b,?] (n)
Installing and configuring VCS
Installing and configuring VCS 5.0 RU3
68