Symantec Veritas Cluster Server 5.0 Update 3, Руководство по установке

Страница: 136 / 176

Modifying configuration files on each remaining node
Perform the following tasks on each of the remaining nodes of the cluster.
To modify the configuration files on a remaining node
1 If necessary, modify the /etc/gabtab file.
No change is required to this file if the
/sbin/gabconfig
command has only
the argument
-c
. Symantec recommends using the
-n N
option, where N is
the number of cluster systems.
If the command has the form
/sbin/gabconfig -c -n N
, where N is the
number of cluster systems, make sure that N is not greater than the actual
number of nodes in the cluster. When N is greater than the number of nodes,
GAB does not automatically seed.
Note: Symantec does not recommend the use of the
-c -x
option for
/sbin/gabconfig
.
2
Modify /etc/llthosts file on each remaining nodes to remove the entry of the
departing node.
For example, change:
0 galaxy
1 nebula
2 saturn
To:
0 galaxy
1 nebula
Removing security credentials from the leaving node
If the leaving node is part of a cluster that is running in a secure mode, you must
remove the security credentials from node saturn. Perform the following steps.
To remove the security credentials
1
Kill /opt/VRTSat/bin/vxatd process.
2
Remove the root credentials on node saturn.
#
vssat deletecred --domain type:domainname --prplname prplname
Adding and removing cluster nodes
Removing a node from a cluster
136