Symantec 10744983 - Mail Security 8320, Руководство администратора

Страница: 40 / 249

Table 2-4
Add LDAP Server page (continued)
Description Item
Specify default synchronization options – This section only appears if Synchronization
is checked for Usage. It allows for the following definitions governing synchronization
behavior:
■
Synchronize every – Specifies how often scheduled synchronization occurs. You can
specify a number of minutes, hours, or days. The default is 1 day.
■
Audit level – Verbosity setting for LDAP audit logs. Choices of Off, Low, and Verbose
are available. The default is Off.
■ Page size – Number of discrete changes that are accepted together for synchronization.
Use a number between 1 and 2,000. The default is 25. If you are using the
iPlanet/SunOne directory server, change Page size to 0 for optimal performance.
Synchronization
Configuration
This section only appears if Synchronization is checked for Usage.
Auto Fill – Places default values in the field for you to modify as needed.
Specify the queries to use – Specifies queries to use for synchronization. Available choices
are:
■
Query start (Sync base DN) – Designates the point in the directory from which to start
searching for entries with email addresses/aliases or groups. To use this field, begin
by clicking Auto Fill for the naming contexts of the directory. Reduce the received list
of DN's brought into the field by Auto Fill to a single DN, or write your own DN based
on the provided list.
■ Custom query start – Allows for the addition of a customized query.
■
User Query – Finds users in the LDAP server. Test checks to see that your Custom/User
query works.
■
Group Query – Finds LDAP groups in the LDAP server. Test checks your Group query
to see that it works.
■ Distribution List Query – Finds Distribution Lists in the LDAP Server. Test checks to
see that your Distribution query works.
Note:
If you need to change Host, Port, base DN, ldap Group filter, User filter, or
Distribution List filter after saving an LDAP synchronization source, you must delete the
source, add the source including all attributes to be filtered, and perform a full
synchronization.
Synchronization Query
Details
To edit an LDAP server definition to the Control Center
1
In the Control Center, click Settings > LDAP.
2
Select an LDAP server definition from the list to edit.
3 Click Edit.
Configuring system settings
Configuring LDAP settings
40