5.
CYLINDER HEAD/
VALVE
5-3
CAMSHAFT REMOVAL
NOTE:
The camshaft, rocker arm and rocker arm shaft can
be serviced with the engine installed on the frame.
Remove the 6mm special bolts.
Remove the R/L cylinder head side cover and cylinder
head side.
Remove the cylinder head cover.
Remove the crankshaft hole cap and the timing
inspection hole cap. Rotate the generator rotor
counterclockwise and locate the piston at the T.D.C. of
the compressing stroke.
Remove the cam chain adjuster screw.
Remove the four holder nuts.
Remove the holder.
Remove the camshaft.
CAUTION:
Support the cam chain to keep it from falling into the
crankcase.
special bolts
nut
nut
