Sym Joyride S 125i, Руководство пользователя

Страница: 21 / 31

20
TIRE INSPECTION
•
Tires should be checked and inflated with the engine shut off.
•
If a tire’s ground contacting curve is abnormal, check it with an air pressure gauge and inflate it to the
specified pressure.
•
Tires pressure must be checked with an air pressure gauge when cold.
0 B
PLEASE REFER TO SPECIFICATIONS FOR STANDARD TIRE PRESSURE
•
Visual check tires for frontal and lateral side walls for
crack or damage.
•
Visual check tires for any nails or small stones wedged
in the tread.
•
Check the “tread wear indicator” condition to see if
tread groove depth is insufficient.
•
A tire with a wear bar showing is worn out and should
be replaced immediately.
CAUTION:
•
Abnormal tire pressure, wear, or crack is the most important cause that results in the loss control of
the steering handle and a punctured tire(s).
STEERING HANDLE FRONTSHOCK ABSORBERS INSPECTION
•
Perform this check with engine shut off and ignition
switch key removed.
•
Visual check front shock absorbers for damage.
•
Operate steering handle up and down, and check front
shock absorbers for noises due to bends.
•
Check the bolts and nuts of front shock absorbers with
wrenches for tightness.
•
Shake steering handle up & down, left & right, and front
& rear to check if it is loosen, has too much resistance
and pulls to one side.
•
Check steering handle if it is being pulled too tight by
the brake cables.
•
Take your scooter to
SYM
Authorized Dealer or
Franchised Dealer for a check or adjustment if any
abnormal conditions are found.
Tread wear
indicator
Crack and
damage
Foreign
materials (nails
or small stones)
10.Inspection and Maintenance before Riding