Sym Joyride S 125i, Руководство пользователя

Страница: 9 / 31

8
7.Use of Each Component
OPERATION OF IGNITION SWITCH
"Start" position
•
Engine can be started in this position.
•
Ignition switch key can not be removed.
"Stop" position
•
Engine is shut off and can not be started in this position .
•
Ignition switch key can be removed.
"Steering handle lock" position
•
Turn the steering handle to left and press ignition switch
key down and then lightly turn it to left to the “LOCK”
position.
•
The steering handle is locked in this position.
•
Ignition switch key can be removed.
•
When unlocking, simply turn the key from “LOCK” to “OFF.”
" fuel tank cap open " position
•
How to open
：
Insert your key into the ignition switch, and turn it to the left.
•
How to lock
：
Push the fuel tank cap and it locks automatically.
CAUTION:
•
Never operate the ignition switch key when the scooter is running. To turn the ignition switch to
“OFF” and “LOCK,” will shut off the electrical system and that may result in a dangerous accident.
Therefore, the ignition switch can only be turned off after the scooter has been completely stopped.
•
Always remove the key and be sure to take the key away with you after locking the steering handle
before leaving your scooter.
• If ignition switch remains in the “ON” position for a prolonged period after the engine has been
stopped, the battery’s capacity will be reduced and this may affect the engine’s start ability.
USE OF BUTTONS
• Engine Stop Switch
Switch to this position to turn off the engine when a state of emergency.
Switch to this position and the engine can be started.
•
Hazard Warning Switch
With the main switch in the
〝
ON
〞
position, this hazard switch with triangular symbol can be operated.
IGNITION SWITCH
Electrical
High/Low
Beam Switch
Turn Signal Switch
Horn Switch
Hazard Warning
Switch
ON
OFF
LOCK
Seat Open switch
Engine Stop Switch
Passing Light
Button
Starter Button