background image

 

 

§

OPERATION OF IGNITION SWITCH 

§

 

“ON” position:     

y

  Engine can be started in this position. 

y

  Ignition switch key can not be removed. 

“OFF” position:    

y

  Engine is shut off and can not be started in this position .   

y

  Ignition switch key can be removed.   

§

OPERATION OF STEERING HANDLE LOCK SWITCH 

§

 

“Steering handle lock” position 

y

  Turn the steering handle to left and insert the key into, 

press ignition switch key clockwise and then lightly turn 
it to left to the “lock” position. 

y

  The steering handle is locked in this position.   

y

  Ignition switch key can be removed. 

y

  When unlocking, simply turn the key from the “LOCK” 

position to the “OFF” position. 

§

OPERATION OF SEAT OPEN SWITCH

§

 

“Fill gasoline lock” position

 

y

  Inserted the ignition switch key in the main switch lock. 

y

  Turn the ignition switch key to the

fill gasoline

 position counter-clockwise. 

y

  Then, the seat will be open. You can fill gasoline in the fuel tank.

 

 

 

 CAUTION: 

y

  Never operate the ignition switch key when the motorcycle is running.    To turn the ignition 

switch to “OFF” and “LOCK” position will shut off the electrical system and that may result in a 

dangerous accident. Therefore, the ignition switch can only be turned off after the motorcycle 

has been completely stopped. 

y

  Always remove the key and be sure to take the key away with you after locking the steering 

handle before leaving your motorcycle. 

y

  If ignition switch remains in the “ON” position for a prolonged period after the engine has been 

stopped, the battery’s capacity will be reduced and this may affect the engine’s start ability. 

y

  Make sure to take the key away with you before you lock your seat. 

 

 

§

USE OF BUTTONS 

§

 

 

 

 

 

 

 

 

 

 

 

 CAUTION: 

y

  Make sure to take the key 

away with you before you 
lock your seat. 

 

Light switches

 

Electrical starter 
button 

Horn Switch

Turn Signal Switch 

Passing 

High/low beam 

switch 

Содержание JE05W1-6
























Отзывы: