6
7.USE OF EACH COMPONENT
(The following is SYM 2 stroke air-cooling 50 c.c. scooter’s basic operation, and they could
vary from different individual models. Please consult the end of this manual.)
§
GAUGES
§
The panel figure for speedometer may vary from model to model, but the location usually are the
same.
CAUTION:
Do not wipe plastic components, e.g. instrument panel, headlight, with organic solvents such as
gasoline…etc to avoid damaging these components.
y
Speedometer
：
Indicates driving speed.
y
Odometer
：
Indicates total accumulated distance traveled.
y
High Beam Indicator
：
This indicator comes on with high beam headlight is turned on.
y
Turn (left/right) Signal Indicator
：
The left or right Indicator will be flashing according to the operated directions of turn signal light switch
when it is turned on.
y
Fuel Gauge:
The pointer in this meter shows how much fuel remains in the tank.
The pointer stays in “E” position when key switch is turned to “OFF”.
y
Engine Oil Warning Light:
Turn the main switch to the “ON” position, if the oil warning light comes on continuously, this indicates
the engine oil level is too low, add oil as required.
Fuel gauge
Odometer
Speedometer
Turn Right
Signal Indicator
Turn Left
Signal Indicator
High Beam
Indicator
Engine oil warning light
CAUTION:
Riding the scooter under low oil level condition could result in severe engine damage. If the Engine Oil
Warning Light comes on, this indicates that the engine oil pressure is low.
If the warning light comes on while riding.
1)Ride safety to the side of the road and stop.
2)With the engine off, check the engine oil level. If the level is low, add oil as required.
If the warning light remains on after adding oil or if oil is not available, call an Authorized SANYANG
Dealer or other competent repair shop.
Use only 2-cycle engine oil meeting Japanese Automobile Standard Organization FC specifications.
SANYANG will not assume responsibility for damages caused from using substandard engine oil.
※
Recommended oil: SYM EXTRA 2X oil.
