background image

 

 

5.DRIVING

 

y

 

Keep the related parts of your body such as arms, palms, lumbar, and toes relax and ride with 
the most comfortable posture in order to be able to react quickly whenever it is necessary. 

y

  Rider’s posture will greatly affect riding safety.    Always keep your body’s gravity in the center of the 

saddle, if your body’s gravity is on the rear part of saddle, the front wheel load will be reduced, and 
this will cause the steering handle shaking.    It is dangerous to ride a motorcycle with an unstable 
handle. 

y

  It will be much easier to make a turn if rider inclines his body inward when turning.    On the other 

hand, the rider will feel unstable if his body and the motorcycle do not incline. 

y

  The motorcycle is hard to control on a bumpy, unleveled, unpaved road, try to know the road 

conditions in advance, slow down and use your shoulder’s force to control the handle. 

y

  Suggestion: Do not load objects on the front pedals unnecessarily, to avoid affecting the riding safety 

and the operation of steering handle. 

 CAUTION: 

The rider’s feeling on the handle is slightly different with a load or without a load.   
Overload may cause the handle to swing and affects the riding safety.   
Therefore, do not overload your motorcycle. 

 

 

 CAUTION: 

y

  Please do not load cargo or luggage on places where are not designed for loading to prevent 

danger and damage. 

y

  Do not place rags or similar objects between the storage compartment and engine to avoid 

engine seizure because of inadequate engine oil supply. 

 

 

SUGGESTION 

To maximize the motorcycle’s performance and prolong its service life: 
The first month or first 1000km is the wear- in period for the engine and components.    Avoid rapid 
acceleration, and keep the scooter at low speed. 

 

 

6. USE GENUINE SPARE PARTS

 

In order to maintain the motorcycle’s best performance, each part’s quality, material, and machined 
precision must conform with the design requirements. 

“SYM Genuine Spare Parts”

 were made from the 

same high quality materials used for the original motorcycle.    No parts would be sold to the market until 
they could meet the designed specifications through sophisticated engineering and stringent quality 
control.    Therefore, it is necessary to purchase 

“SYM Genuine Spare Parts”

 from 

“SYM Authorized 

Dealers”

 when replacing spare parts.    If you buy cheap or fake substitute parts from the market, no 

guarantee can be provided either for the quality or durability.    Also, it may result in unexpected troubles 
and lower the motorcycle’s performance. 

y

  Always use 

SYM Genuine Spare Parts

 to keep your motorcycles pure blood and to ensure its long 

service life. 

Содержание JE05W1-6
























Отзывы: