The home technology brand for the entire house. More information at
www.sygonix.com
GB
Operating instructions
CCD Colour Camera, 700 TVL, 3.6 mm
Intended Use
This camera is intended for video monitoring and protecting secluded or critical areas
(e.g. entrance areas, stairwells, or similar).
The product is suited for use only in dry indoor locations. It must not get damp or wet.
The camera is intended to be used only with a stabilised mains voltage of 12V/DC.
Please bear in mind that it is prohibited by law to observe strangers with a camera
without their knowledge and consent. Observe the rules and regulations of the coun-
try where you are using the camera.
Any use other than that described above may damage the product. Moreover, this
may give rise to hazards such as short-circuiting,
fi
re, electric shock, etc. No part of the
product may be modi
fi
ed or converted!
The safety instructions must be observed at all times!
This product complies with the applicable national and European requirements. All
names of companies and products are the trademarks of the respective owner. All
rights reserved.
Package Contents
• Colour camera
• Allen key
• Operating Instructions
Explanation of the symbols
This symbol indicates speci
fi
c risks associated with handling, function and
use.
The "arrow" symbol indicates special tips and operating information.
Safety Instructions
The warranty will be void in the event of damage caused by failure to ob-
serve these safety instructions! We do not assume any liability for any
consequential damage!
Nor do we assume liability for damage to property or personal injury
caused by improper use or failure to observe the safety instructions. In
such cases, the warranty will be null and void.
• The unauthorised conversion and/or modi
fi
cation of the product is not per-
mitted for safety and approval reasons (CE). Never dismantle the product.
• The camera is only intended to be used with a stabilised direct current of
12 V/DC. The inner contact of the round plug should be Plus/"+", the outer
contact Minus/"-".
• The product is not a toy and must be kept out of the reach of children. It
should be operated out of the reach of children.
• The use of the surveillance camera system does not replace the personal
supervision of children, or people who require special assistance, but only
serves as a support to this supervision.
• The camera is suitable for indoor use only; it must not get damp or wet.
• The camera may not be exposed to extreme temperatures, direct sunlight,
strong vibrations or heavy mechanical stress.
• Make sure that the connection cable is not pinched or damaged by sharp
edges.
• Do not leave packaging material carelessly lying around, since it could be-
come a dangerous plaything for children.
• Handle the product with care, it can be damaged by impacts, blows, or ac-
cidental drops, even from a low height.
• If the camera is used with other devices (e.g. a monitor), the operating in-
structions and safety notices for these devices must be followed.
• It can be assumed that safe operation is no longer possible if:
- the device is visibly damaged,
- the device no longer works
- the device has been stored under adverse conditions
- it was exposed to heavy loads during transport
• In commercial institutions, the accident prevention regulations of the Em-
ployer’s Liability Insurance Association for Electrical Systems and Operating
Materials are to be observed.
• If you have any questions that are not answered in this manual, please con-
tact our technical service or another specialist.
The Camera's Components
1
2
3
4
5
6
1 Mounting
ring
2 Fastening screws
3 Camera
4 Stop ring
5 Locking ring
6 Grub screw
Installation
• If the grub screw (6) is inserted in the locking ring (5) at the time of delivery, remove
the grub screw using the Allen key enclosed.
• Then, unfasten the locking ring (5) by rotating it counter-clockwise.
• For the connection cable, you can drill a hole of corresponding size in the installation
location (protect the plug from dust and dirt e.g. with a strip of adhesive tape), or
pull the connection cable through a slot in the mounting ring (1).
• The mounting ring (1) can be fastened in the installation location using 4 screws (2).
Use suitable screws and wall plugs, depending on the surface.
