Step 3: Change the master code
The default master code (0000) must be changed when you set up the code lock.
•
Enter programming code “01” and the desired new master code (e.g. “12345”), then press
the hash button to confirm.
• The code lock emits two beep tones and the centre LED flashes twice orange.
The existing master code (default code = “0000”) will be overwritten and can no longer
be used. You will need to enter the new master code “12345” the next time you enable
programming mode.
Step 4: Creating two different transponder cards for output #1
Read card
(a) (b) (c) (d) (e)
(a) Programming code 10 for output #1
(b) Select the desired mode - transponder card only - 1
(c) User ID “000” (for output #1 is possible: 000 - 999)
(d) Reading the transponder card; reading is confirmed with a short beep tone
(e) Save programming (code lock emits two beep tones and the centre LED flashes twice
orange).
Read card
(a) (b) (c) (d) (e)
(a) Programming code 10 for output #1
(b) Select the desired mode - transponder card only - 1
(c) User ID “001” (for output #1 is possible: 000 - 999)
(d) Reading the transponder card; reading is confirmed with a short beep tone
(e) Save programming (code lock emits two beep tones and the centre LED flashes twice
orange).
110
