background image

 
 

EN 

13 

Warranty Conditions 

 
Under current SycoTec delivery and payment conditions, SycoTec undertakes warranty for satisfactory 
function and freedom from faults in material and manufacture for a period of 12 months from the date of 
sale certified by the vendor. 
In the event of justifiable complaints, SycoTec shall supply spare parts or carry out repairs free of charge 
under warranty. SycoTec accepts no liability for defects and their consequences which have arisen or could 
have arisen as a result of natural wear and tear, improper handling, cleaning or maintenance, non-
compliance with the maintenance, operating or connecting instructions, corrosion, impurities in the air 
supply or chemical or electrical influences which are unusual or not admissible in accordance with 
SycoTec's standards. The warranty claims shall become null and void if defects or their consequences can 
be attributed to interventions in or modifications to the product. Warranty claims can only be validated if they 
are notified immediately in writing to SycoTec. 
A copy invoice or delivery note clearly showing the manufacture number shall be attached if products are 
returned. 
 
 

CE Declaration of Conformity 

 
The CE Declaration of conformity may be requested or downloaded from www.sycotec.eu. 
 

Содержание e@syDrive 4638















Отзывы: