SycoTec e@syDrive 4638, Краткая инструкция по использованию, Страница: 12 / 14

EN
12
To write the project to the inverter select "Loader" in the menu bar and then "Write project to drive".
13.0 Status Display and Error Messages
The 7-segment display shows status and error messages.
All messages end with dot behind the last digit. When the first digit is "E.", there is a permanent error.
Examples:
1.
Startup Message
-
Controller is in boot loader mode: Display appears short-time when
the device is booted and when the system software is loaded.
2.
Ready To Switch On
-
Controller is switched off
-
No error
3.
Controller Active
-
Controller is switched on
-
No error
4.
Error Message
-
Controller is switched off due to error E40
The error is not present anymore
5.
Persistent Error Message
-
Controller is switched off due to error E40
-
The error is still present