SycoTec e@syDrive 4638, Краткая инструкция по использованию

Страница: 8 / 14

EN
8
6.3 Analog Inputs
Name I/O Function/Assignment Pin
AIN0+ I Speed reference value X18/3
GND I/O Ground X18/4
AIN0- I Reference point for AIN0+ (bridge with ground) X18/7
VCC_10 O 10 V supply voltage X18/9
Voltage interface with input voltage range: ± 10 V
Can also be connected to potentiometer (500 Ohm
– 5 kOhm
7.0 External Ballast Resistor
Name Function / Assignment Pin
Rextern External ballast resistor X41/1
Rintern Internal ballast resistor X41/2
UB+ X41/3
If no external ballast resistor is used, pin 1 and pin 2 of connector X41 must be bridged.
The technical data of the optionally connected external ballast resistor must be entered via the
"drivemaster2" software.
By default no external ballast resistor is set.