Installing Adapter for SAP R/3
26
Adapter for SAP R/3
Temporary Installation Directory
The installer uses a temporary location during the installation process. The
default temporary location on Windows is defined in the system environment
variables and is usually set to C:\temp. The default temporary location on
UNIX is /var/tmp.
If enough space is not available in the default temporary location, the installer
may not start or may start but notify you that sufficient space is not available.
You can do one of the following:
•
Move or delete files to provide space.
•
Launch the installer using a temporary directory on a different drive
(Windows) or location (UNIX).
❖
To install on a temporary directory other than the default directory:
1
For Windows, enter the following:
setup -is:tempdir <full path to alternate temp directory>
2
For Unix, enter the following:
./setup -is:tempdir <full path to alternate temp directory>
Note
Do not use spaces or special characters in your UNIX path.
Installing Adapter for SAP R/3
For all installation instructions, <install dir> refers to the default installation
directory.
•
If installing on Windows, the default is C:\Sybase.
•
If installing on Unix, the default is /user/u/Sybase. When installing on
Unix, do not use spaces or special characters in the path.
Содержание Adapter for SAP R/3
Страница 1: ...Installation Guide Adapter for SAP R 3 Version 3 9...
Страница 24: ...Upgrading Rules 16 Adapter for SAP R 3...