Sybase Adapter for SAP R/3, Руководство по установке

Страница: 19 / 46

CHAPTER 1 Migrating to Adapter for SAP R/3 Version 3.9
Installation Guide
11
Example Log File
Source Control Record: SAP.OF.ABSEN1.CR
Destination Control Record: SAP.OF.ABSEN1.CR
Source Segment Name: SAP.OF.E2ABSE1
Destination Segment Name: SAP.OF.E2ABSE1
Field: SAP.E2ABSE1.BDEGROutMap: InMap: LEG.F1
Field: SAP.E2ABSE1.MOABWOutMap: InMap: LEG.F2
Field: SAP.E2ABSE1.ZEITYOutMap: InMap: LEG.F3
Field: SAP.E2ABSE1.AGRUNOutMap: InMap: LEG.F4
Field: SAP.E2ABSE1.BEGDAOutMap: InMap: LEG.F5
Field: SAP.E2ABSE1.ENDDAOutMap: InMap: LEG.F6
Field: SAP.E2ABSE1.ATEXTOutMap: InMap: LEG.F7
Adjusting for Customization
Make sure that the new format contains the correct default values for control
records. (Default values in control records are optional.) The conversion tool
transfers user-defined values and mappings, but it does not transfer default
values.
Note If the original format specified default values for the partner profile fields
of the control record, then you must manually set the values to those literals.
This applies to the literals named SAP.<IDOC TYPE>.* where * is one of the
following: RCVPOR, RCVPRN, RCVPRT, SNDPOR, SNDPRN, SNDPRT.
Suggestions for Converting IDocs
• Use descriptive names for the format export files.
• NNFie for 4.x uses the sqlsvses.cfg file, NNFie for 5.x uses the NNFie.cfg
in the local directory (if one was created) or it searches for a copy of
nnsyreg.dat file. The example commands assume the session name is
nnfie.
• Use the which command to be sure that the expected version of nnfie.exe
is being referenced.