Swyx SwyxPhone L400, Пользовательская документация

Страница: 15 / 34

How do I transfer a call without using Inquiry Call? 2-5
2.9 How do I transfer a call without using Inquiry Call?
Your SwyxPhone can be used to accept incoming calls and then to transfer these calls to another
subscriber, without waiting for the new subscriber to answer. This means you can connect two
subscribers even though there is not yet an active connection to one of the subscribers.
This is how you transfer a call without inquiry
You currently have a call (e.g. with Subscriber A) and the line is active.
1. Press a free Line button.
2. Now select the number of the subscriber, to whom you would like to transfer the call
(Subscriber B).
3. Then press the “Call Transfer” button or simply go on hook.
Subscriber A hears a ringing tone. The Line on which you initiated the second call will
become free and the first line will change its status from “Hold” to “Transferring”. Your
previous caller (Subscriber A) hears the telephone ring.
The call will be accepted directly by Subscriber B.
If the call is not accept within 20 seconds or if the call is redirected to Voicemail, the call
attempt will be terminated and the caller will be placed once again on “Hold”. He will hear
the usual music on hold.
4. You can activate the call again by pressing the Line button.
In case the caller to whom the call should be transferred is not available, please remember that
the call may be redirected with some delay. If the call is redirected to Voicemail, the call transfer
will automatically be interrupted, the caller is once again put on “Hold” and will hear the normal
music on hold.
2.10 How do I redirect a call?
You can redirect incoming calls
• to another telephone number (internal or external) or
• to your Standard Voicemail.
This is how you activate immediate redirection
1. Press the “Redirection” button on your SwyxPhone
The assigned LED glows/goes out. The redirection is activated resp. deactivated.
To configure the immediate redirection on your SwyxPhone L400 directly, please refer to
Chapter 3,
Configuration of SwyxPhone L400 , page 3-1.
For further information please refer to the SwyxIt! documentation.
Transferring a Call
Without Inquiry
Redirection:switch
on/off