Swyx SwyxPhone L400, Пользовательская документация

Страница: 11 / 34

Telephoning with SwyxPhone 2-1
2 Telephoning with SwyxPhone
This chapter describes the following basic telephone functions.
• How do I call a subscriber? (page 2-1)
• How do I answer a call? (page 2-1)
• How do I end a call? (page 2-2)
• How do I switch between two subscribers (Call Swap)? (page 2-4)
• How do I connect two subscribers to one another? (page 2-4)
• How do I redirect a call? (page 2-5)
• Speaker (page 2-6)
2.1 How do I call a subscriber?
SwyxPhone is inactive, but logged on.
This is how you call a subscriber
1. Simply lift the handset.
You will then hear the dial tone.
2. Enter the number you want using the numeric keypad.
The subscriber is then immediately called.
2.2 Other Options for Calling a Number
• Lift the SwyxPhone-handset and press the Redial button. The number of the last call will
be redialed immediately.
• Press a Speed Dial. The number assigned to the Speed Dial will be dialed immediately.
2.3 How do I answer a call?
If an incoming call is received, which is directed to you, or a call is forwarded to you, or if a
Group Call is received for a group of which you are a member,
• a ringing sound will be produced and
• the Line button, on which the call is received, will blink.
This is how you pick up a telephone call
1. To pick up the call,
• simply lift the handset. The handset is activated so that you can speak to the caller.
If you pick up a call by pressing the Speaker button only, please note that there is no microphone
in SwyxPhone L400. In this instance you only can listen to the caller. If you like to talk to the
caller, you must lift the handset. The Handset button is not available in the preconfiguration.
Call Subscriber
Pick up Call